橡胶接头「测试站不选词,只靠文章页获取流量」-「董帝豪SEO」

百度知道VIEWS

橡胶接头「测试站不选词,只靠文章页获取流量」-「董帝豪SEO」

「已解决」管道内橡胶接头的安装要求?

来源:「已解决」管道内橡胶接头的安装要求? 发布于:2019-06-28 22:27   浏览:
  橡胶接头使用寿命长达除了接头本身质量有关外,和安装环境、是否正确安装也有很大关系,淞江集团小编就来说说管道内橡胶接头的安装和使用要求。
  The service life of rubber joint is not only related to the quality of the joint itself, but also to the installation environment and whether it is installed correctly.
避震喉的安装要求
  1、安装时,需选对正确型号的接头产品,接头补偿量和位移量需适等,*以大于或小于,安装过程中,可曲绕橡胶接头需处于天然状态,*人为变形。
  1. When installing, it is necessary to select the right type of joint products, the compensation and displacement of the joint should be equal, * to be greater or less than, during the installation process, the flexible rubber joint should be in natural state, * artificial deformation.
  2、安装接头时,螺栓的螺杆需向接头外侧,法兰端面的螺栓需按对角压的方法均匀拧紧,*压偏。
  2. When installing the joint, the bolt of the bolt should be directed to the outside of the joint, and the bolt of the flange end face should be tightened uniformly according to the diagonal pressure method, * deflected.
  3、普通橡胶接头使用温度为0-60°,适用介质为普通水,如果介质环境改变,如温度升高、环境变为酸性、碱性、油性环境等,也需采用对应的.质接头,如耐高低温接头、耐酸碱性接头、耐油性接头等。
  3. The service temperature of ordinary rubber joint is 0-60 degrees, and the suitable medium is ordinary water. If the medium environment changes, such as temperature rising, environment becoming acidic, alkaline and oil environment, the corresponding quality joints, such as high-low temperature joint, acid-alkaline joint and oil-resistant joint, should also be adopted.
  4、橡胶接头因为含有橡胶缘故,所处环境需在阴凉干燥环境下, 如需安装在露天、暴晒环境,对橡胶接头正常使用有所损害。
  4. Rubber joints because of the rubber, the environment should be in a cool and dry environment, if installed in the open air, sun exposure environment, the normal use of rubber joints will be damaged.

本文作者:董帝豪

本文地址:http://www.chinadihao.com/260.html

本文来源:上海淞江减震器集团有限公司

注意事项:专业型问题以淞江集团技术部解释为准,网编主要目的是为大家提供一个流量入口。

本文著作权归上海淞江集团所有,任何形式的转载都请联系作者获得授权并注明出处。


推荐产品








最新推荐:
·造成可曲挠橡胶接头泄露的原因,主要的是安装方法和后 ·耐磨橡胶接头的耐磨性能,丁基橡胶材质,可以降低损坏
·耐高压橡胶接头的制作和功能,防拉脱加装限位装置和负 ·橡胶接头出现意外的原因及保护措施
·橡胶接头适用范围,如何区分什么工况用什么材质或形式 ·橡胶接头怎样防止球体老化?储存应避免光照
·耐酸碱橡胶接头的使用及功能介绍,分别为强酸和弱酸 ·购买可曲挠橡胶接头的压力选择,爆破压力,工作压力,
·可曲挠橡胶接头使用中的异常现象:拉脱、龟裂、凹瘪、 ·丝扣橡胶接头持久耐用的原因,为什么不易损坏